| |
| The
ITC-2 Mini is a low cost version of the ITC-2 Controller. Providing
the same modular design and the flexibiliy of the ITC-2, this
mini-version is a cost-effective choice for small intersections
and pedestrian crossings.
|
Compactly designed SWARCO ITC-2 Mini
with size 290x150x75 mm, and weight 1.5 kg.
|
ITC-2
Mini is available also in a 42V version |
|
| The
ITC-2 Mini has four signal groups and it can be installed on a DIN-rail
in a small cabinet. The controller has been developed according
to European and national standards. |
|
Components: |
| • |
The
built-in operator panel allows full control and access to
all parameters. |
| • |
The
police key can switch signals on/off and to amber flash as
well as full stage control. |
| • |
RS232 terminal interface providing further access to the internal
software for control and debugging. The parameters are password
protected with two security levels. |
| • |
Vehicle
detection system based on inductive loop-detectors with 8
loops per card. |
| • |
Lamp
group cards with triac outputs for 230 or 42 VAC with full
monitoring of voltage and currents on all outputs. |
| • |
Optional
I/O-card for control of relay input or output. |
| • |
CPU-board
with i386 processor for control and supervision of functions.
The CPU has a real time clock with battery backup. |
|
|
Software
functions: |
| • |
16
traffic plans and 16 traffic situations available with standard
parameters for programming of local and central co-ordination.
Cable-less linking is possible with a GPS clock |
| • |
The
controller can have eight primary stages and unlimited number
of secondary stages. The logic is signal-group controlled
with a full conflict-matrix between all groups. |
| • |
Traffic
counting with internal detectors with seven-days back-up.
User defined counting interval. |
| • |
Fulfils
Scandinavian LHOVRA-specification. |
| • |
Built-in
bus priority functions. |
| • |
Built-in
advanced programmable control logics enabling the user to
create new functions. |
| • |
For
control and supervision ITC-2 has interfaces to Utopia/Spot,
Omnivue and EC-Trak UTC systems. The controller can send SMS
or E-mails in case of faults. |
| • |
Internal web-interface. |
|
| Safety: |
A
safety CPU guarantees that no hazardous situations occur. The
CPU monitors: |
| • |
All colour- and green/green conflicts |
• |
Min.
and max. lamp load for red, amber and green |
| • |
Signal sequences |
• |
Min. and max. main supply voltage for safe operation |
| • |
All flash periods |
• |
Max.
mains voltage dip before restart |
| • |
For
coordinated signals min and max cycle time |
• |
Wait
lamp duration |
| Technical
Specifications: |
| • |
Basic
sizes
4 signal-groups |
• |
I/O
interfaces
5-48 V, 100 mA |
| • |
Eight
loop detectors
|
• |
Communication
RS 232, Ethernet |
| • |
Voltage
230 VAC ±15% |
• |
System
connections: Utopia/Spot, Omnivue, EC-Trak |
| • |
Ambient
temperature:
-40 +80°C |
• |
Certifications
EN-12675, EN-50293, HD-638 S1 |
| • |
Load
per output
Max 500 VA |
|
|
Swarco
Technology ApS, Klokkestøbervej 21, 5230 Odense M, Denmark
Phone: +45 63 152 200, Fax: +45 63 152 219
e-mail: office@swtech.dk
Copyright © 2006 Swarco Technology ApS |
|
 |
|
ITC-2 Mini |
|
